8cc9d8522f
Fix bug #602 "Warning message trying to linearize a transient analysis vector"
by changing the way "ngspice -a" (autorun option) works. The inserted code
now checks whether a simulation has already run by examining $curplot
before forcing "run". Also at most one simulation is forced to run.
4 years ago
06131d8107
Rewrite code with Visual Studio complaints.
4 years ago
56d07aab31
Transfer i(xx) to xxx#branch only when i is the first
character of the token or preceeded by a space.
4 years ago
92ba8ac88e
Just to notify that this might need a better solution
4 years ago
f832380dc9
FIXME: This is a hack to re-enable 'make check'
Do not print warning if in batch mode.
4 years ago
98763c0add
Note: ix: dc value used for op instead of transient time=0 value
Former warning message or note only issued when dc value and
value at transient time=0 differ.
4 years ago
7483f6224d
Note: vs: dc value used for op instead of transient time=0 value
Former warning message or note only issued when dc value and
value at transient time=0 differ.
4 years ago
6037450952
Warning message, when 'run' is called without job
(tran, op, ac etc.) is defined.
4 years ago
3af627db44
Change error messages to warning messages, because simulator moves on
and command is ignored.
Make messages more verbose (which command?).
4 years ago
1bcbe8e6d8
Don't send error message to stdout, but to stderr.
4 years ago
519ce44227
safeguard against circuit not being abvailable,
avoid crash
4 years ago
4713cf0bf7
add parameter description
4 years ago
e703bd9142
Add comment about ps_udevice_msgs variable. Set to 1 will print PSpice instance names and types which are not supported and are found when processing a subckt.
4 years ago
e9855be595
If variable ps_port_directions >= 2, also show the translated Xspice statements.
4 years ago
cb42895dad
example for pwlts source code model
4 years ago
1d026475a2
pwlts: a pwl v/i source with time input, smoothing and limiting functions
4 years ago
0754ea7657
Make the Error message a Warning message,
because ngspice may move on
4 years ago
0af4932c6f
Prevent a crash if (due to input error) the node_table is not available.
4 years ago
43c5ffaae8
Add special savecurrents options:
options savecurrents_bsim3, savecurrents_bsim4, and savecurrents_mos1
will save all device currents as listed in chapts 31.6.1, .8 and .9
of the ngspice manual. Pure savecurrents will yield a subset of MOS1
currents, as seen before.
4 years ago
e6772f4e4e
Prevent crash in gettok() and similar functions by checking for NULL
input. Return NULL instead.
4 years ago
2126230b64
Prevent crashes when nodes or tables are not available,
e.g. due to missing input file.
4 years ago
037293c81e
Improved error message: more info on the bad set form
4 years ago
26c687b088
enable evtcheck_nodes.c for MS Visual Studio
4 years ago
a0357b3432
Remove search for "family" parameters on subcircuits in XSPICE
automatic bridging support as string-valued parameter support is
not yet intgrated.
4 years ago
4115064fd5
Latest auto-bridge code from development branch.
4 years ago
b1341c8e30
Insert XSPICE bridging devices automatically when an analogue node
has the same name as an XSPICE event node (including digital nodes).
The function Evtcheck_nodes() is replaced by a new version in its
own file.
4 years ago
07bb809158
Iterations for op or dc may start with arguments 0 for ln().
To cope with this, and potential overflow in exp function,
some limits have been added.
4 years ago
d39c60542d
Enable power measurement for W switch
4 years ago
fe8eb26aaf
Replace end-of-line comment delimiter $ by ;
So to make it independent from compatibility switch selection.
4 years ago
79bb8edc90
Allow individual current measurements in switches or
linear dependent sources.
4 years ago
f1eb8d3955
examples for .probe alli or .probe i(xx)
4 years ago
7e610c8487
.probe alli improved:
* Enable current mesurement for I source
* Look at only the first 2 nodes of S and W switches
and F and G controlled current sources, measure current
with = voltage source added to second node. So we get
I(Fx), I(Gx), I(Sx), and I(Wx).
4 years ago
3dbfc934bb
set colors for grids and data
4 years ago
04445e42ea
Make FROM/TO work in TRIG/TARG and WHEN variants of .meas/meas command.
Discussion at
https://sourceforge.net/p/ngspice/discussion/133842/thread/973e152274/
4 years ago
a1dd1f5563
Check for tran at first when linearize is called.
4 years ago
3ca91aa1ac
Make a trivial change to support (n)and3a, (n)or3a, (n)xor3a types. These are not used in any of the Micro Cap libraries. Completes support for Pspice tristate gate types.
4 years ago
4706c3dea5
Add 74xx283 4-bit adder example from the Micro Cap digital example circuits. Pspice primitives are translated to Xspice and a waveform is displayed using GTKWave. This is a digital-only test.
4 years ago
abd4af1ae6
Ignore IO models in a subckt. Setting variable ps_port_directions to a non-zero int prints the directions (IN, OUT, INOUT) of subckt ports.
4 years ago
2d9f86c742
Check for name collisions between nodes generated during translation from Pspice to Xspice and instance pin or subckt port names. These are reported as ERRRORs.
4 years ago
e9b5a9a957
aswitch needs two input nodes because gd has been selected for input.
4 years ago
c8ed9590b7
Handle the case when control voltages on and off are equal.
Update the linear switch: add the limits to resistance ron, roff
Update the log switch: correct the resistance calculation for
von < voff
Add some examples for the pswitch.
4 years ago
b94ef139dd
Avoid an endless loop: Safeguard function
search_plain_identifier(char *str, const char *identifier)
against identifiers being an empty string.
4 years ago
5b0b328186
If a node name to be plotted ends by ':power', its type is set to POWER.
Thus 'settype power nodename(s)' in the examples is no longer necessary.
4 years ago
fc0bf595f2
Update to .probe command:
If no .save or save command given by the user, add '.save all' internally.
To do so, check for .save or save.
Update to the .probe p command (power measurement)
Add probe_int_ to internal nodes and instance names, where appropriate.
These nodes will be disregarded when setting up the plot structure.
4 years ago
2deefe1fbc
New tables for MOS devices
4 years ago
765d2e8a0e
Return data to input directory.
4 years ago
3da97fa277
Handle .if ... .else ... .endif before .csparam is executed,
thus allowing parameter entry to .control section being dependent
on .if
4 years ago
a69dd1bcde
Simplify the NMOS or PMOS selection by setting only one parameter
'mostype'
ngspice-37+ is required.
4 years ago
8038021369
Remove some dead code in the dec_bridge code model.
4 years ago
88d5e723ed
Fix double free in XSPICE CALLBACK functions as desribed here:
https://sourceforge.net/p/ngspice/mailman/message/37677362/
and add missing CALLBACKs in models that use STATIC_VARs with
pointer values.
4 years ago
Giles Atkinson
Holger Vogt
Brian Taylor