60ddad4983
Make the resistor name unique for a device with multiple unconnected nodes
1 year ago
70b407d835
Improve error message during setup of TXL or CPL
1 year ago
793fca6e2a
If preprocessing is skipped, we still need the number of lines in the deck.
1 year ago
8e05683592
Prevent crash if number of lines is wrong/not available ...
1 year ago
5079b42f26
Fix bug 483 again. Faulty merges of KLU changes for cider were
introduced in ngspice 42. These broke the fix.
1 year ago
20d6fb460f
Add a comment
1 year ago
e2c4182888
Vectors Cy_xxx are of type 'current'.
1 year ago
c716e34425
Use the correct type for each vector after S-parameter analysis.
Cy_1_1 is still missing (voltage as default).
1 year ago
de7ae6e678
Fix bug 711 reported by Sonia Edward
1 year ago
3d6d0d880a
Improve comment
1 year ago
27db91480b
Fix bug no. 708, reported by Philip Sauvage.
1 year ago
16798edb36
Minor change.
2 years ago
5f8ab0eb67
Minor change.
2 years ago
9d2e2f77c0
Minor change.
2 years ago
b40dcaa18d
OpenVAF-reloaded compiled model support.
2 years ago
368c59466b
Allow plotting a single point in an ascii plot
(command .asciiplot)
1 year ago
e3f7cf3e0a
Fix Bug #698 -
"Initial transient solution assumes voltage source=0 even if it is not."
Cause was another error in ad5bb9eb8d#607 , which uncovered
an earlier latent bug.
1 year ago
537d55d80b
Improve an error message.
1 year ago
cf812da363
Try to clarify the mechanism of parameter substitution and add
an example of substituting an XSPICE vector parameter.
1 year ago
e130371410
Added: Error: Pole/zero analysis is not (yet) supported with 'option KLU'.
Use 'option sparse' instead.
1 year ago
09d352be12
This does not fix noise analysis with klu.
It does add missing { and } when event-driven instances are not present.
Without this change CKTop will always be called again directly in NOISEan even
if CKTop was previously called by EVTop. This matches the intended
behavior before #ifdef KLU was added.
2 years ago
b350786c48
Some cosmetics
1 year ago
bafa3ff8a3
Revert the sign of ac_gain.real
Fix bug no 697, reported by Matthieu Guerquin-Kern
1 year ago
0fadbdc488
Don't compile with OpenMP support, as it is not used in KLU.
1 year ago
2d9e5fede6
/openmp:llvm removed from additional options for the 'Release' builds
(however keep it in the 'ReleaseOMP' builds).
1 year ago
f300154922
Insert correct conversion sections for KLU matrices
2 years ago
c8959ba072
ignore visualc xspice verilog dir
2 years ago
2129ac26fd
Add optional series resistance or junction capacitance, if non
is defined in the .model statement. This may help achieving
convergence if subcircut models of opamps etc use simple diodes
as voltage limiters. Example call:
.options diode_cj0=20p diode_rser=20m
2 years ago
d5f0c6598f
Fix commit 09685dde1
("Set lower case for variables or vectors in command 'echo'.
Tokens starting with '$' will get lower-casing.", 2024-09-07)
Don't use s as name for temporary string, as s has been set
already and is used later.
2 years ago
b62528d7e5
Set lower case for variables or vectors in command 'echo'.
Tokens starting with '$' will get lower-casing.
2 years ago
82af46085d
Enable using fftw3 as a build option of shared ngspice on Windows
2 years ago
d425d38c44
Old deprecated ADMS examples removed.
2 years ago
419e821a09
Fixed KLU conversion to complex for SP Analysis
2 years ago
287280c3db
Make error messages more verbose:
add line number and source file name.
2 years ago
bce621680b
Add line number and source file to some error messages
2 years ago
8e8716abc7
Fix warning message
2 years ago
c2c35b56a4
More on verbose error and warning messages
2 years ago
4e6af5a55f
Allow KiCad special token V(/xyz) by quoting
2 years ago
c33fd66a21
Make error messages more verbose:
add line number and source file name.
2 years ago
3528156d14
Fix bug #680 . Check that src/dest memcpy arguments are non-NULL.
2 years ago
4e318c7a23
no built-in model for bsimbulk, so no qa test needed
2 years ago
8fbd357fdd
extend bsim4 operating point info list
2 years ago
123ed0aada
Add simulator version info to raw file ('write' commad)
using an extra line 'Command: ...').
The old sequence (adding commands manually to raw file) is
still available.
The 'Command: anycommand' will not be executed if loading
an ngspice-generated raw file. Raw files from other simulators may
generate a warning that the command is not available.
2 years ago
1087c6a0c2
Add simulator version info to raw file in batch mode,
using the line 'Command:...'
2 years ago
14844af175
Fix #686 : "XSpice Verilog Vector Input Bug".
Bug report and fix by Aodhan Murray.
2 years ago
5f059abdca
Improve debugging using shared ngspice:
print out each command received.
2 years ago
f495431509
Add a comment
2 years ago
a96237061d
Copy the correct spinit to ngspice/visualc
2 years ago
9e571d7df1
git ignore vcd files
2 years ago
984cd9cc10
extend unwanted output list
2 years ago
Holger Vogt
Brian Taylor
Árpád Bűrmen
Giles Atkinson
Alessio Cacciatori
dwarning
Francesco Lannutti