1a00a30f18
Add support for srff.
4 years ago
7f38ce4ebb
Remove debug code.
4 years ago
648218d5a8
Remove invalid check.
4 years ago
6a067378cb
Add optional debug code to check for name collisions. Connector nodes between gates now have a con_ prefix.
4 years ago
5b3862ebc7
Prevent multiple d_zero_inv99 models per subckt.
4 years ago
9361e9ae6c
Follow convention, use eq() macro. Show replacement cards when ngdebug=TRUE.
4 years ago
e38e1099b5
Create pin and port lists only when variable ps_pins_and_ports is set != 0.
4 years ago
ac9559db76
Remove optional:, params:, text: before generating a ports list.
4 years ago
528c50dc46
Retain the param: section after removing the optional: section from a Pspice subckt declaration.
4 years ago
5a50868264
Add more comments. Move incompatible input name checks to add_..._inout_timing_model() functions for dff, jkff, dltch.
4 years ago
112e47d0d3
This test is equivalent to examples/xspice/xspice_c3.cir and uses Pspice subckts for the divider and nand gate.
4 years ago
e8dfd16cb2
Add counter test. Check for usage of $d_lo, $d_hi, $d_nc usage with dff, jkff, dltch which will not translate to Xspice.
4 years ago
f7c519f149
All-digital U* device examples. No a/d or d/a interfaces on the subcircuits.
4 years ago
ecf4ea8978
Get rid of -Wpedantic warnings.
4 years ago
4ce9add137
Remove debugging asserts.
4 years ago
bc8d67d5fa
Generate lists of subckt ports indicating direction (in, out, inout.)
4 years ago
1fb533a3d4
Stopped memory leak in continuation cards when removing old cards.
4 years ago
89c698d4ea
Slight cleanup. Some work ensuring that generated names do not collide may be necessary.
4 years ago
219ca23635
For debug tracing, list the cards before and after udevice replacements.
4 years ago
18e17cefdf
Add pullup/down. Skip spurious '*' line.
4 years ago
813c73966d
Add support for oa/oai compound gates.
4 years ago
7b5c780043
Fix a memory leak. Cleanup the code a bit. All-digital Pspice subckts with U* devices for most used gates/ff can be handled. More extensive test cases are necessary. Also, interfacing subckts with analog ports is not implemented.
4 years ago
96a1b528fd
Replace Pspice U* and .model cards with their Xspice equivalent statements. There are still memory leaks which will be plugged next. The .subckts have only digital ports, which will need to addressed for mixed A/D designs.
4 years ago
2c3c632349
Add translation of ao/aoi compound gates.
4 years ago
a2fd346b1a
Trial run at scanning cards for Pspice U* devices and models. #define INTEGRATE_UDEVICES to turn it on. No new cards are created yet, just lots of debugging info.
4 years ago
9bbcf20584
Add brief usage notes and makefile. asserts will need to be removed after integration is complete.
4 years ago
b367434c78
Add default zero delay models d0_gate, d0_eff, d0_gff, d0_tgate. Use tprintf.
4 years ago
620c15a981
Initial files for translating Pspice u.. instances and timing models into Xspice equivalents. Standard gates, tristate gates, dff, jkff, dlatch are supported. Compound gates and pullup/down are not done. Makefile and frontend/inpcom.c changes have not been finished. These modifications will be needed to complete integration.
4 years ago
564a3cb2f7
No error message when Optran returned 0
4 years ago
d8119aaca4
Don't set interactive mode
4 years ago
d3a436b7dd
re-format indmask.c
4 years ago
0387a95218
Add missing parameter retrival
4 years ago
b4a2c85b54
Asl Lundin's correction only when suitable modelparameters are given.
4 years ago
360b7dc7ed
Make warning message on missing init file more verbose.
4 years ago
f1d944e4c4
remove typo
4 years ago
f698ce6281
Write out the current in the old fashion
1 v1#branch current
when keep#branch is set in .spiceinit.
To make the raw file compatible with ICCAP.
4 years ago
879030bbd8
Add a warning when Lundin's correction factor is not
calculated because the geometries are too small (< 1um).
4 years ago
500d72f270
Add coil diameter dia to the inductor parameters.
dia (diameter) takes preference over csect (cross section)
4 years ago
79ef586fef
Add Lundin's geometry correction to the
inductance formula
4 years ago
4a96691b49
Fix a bug in the inductance formula.
4 years ago
6b83a57a18
Exit when executing the input fails,
if -o option (log file) is set and not in interactive mode.
Enables running the paranoia suite without hanging if
something goes wrong.
4 years ago
c76efd47ed
If the 'source' command fails, fall back to the input
only if in interactive mode. Otherwise exit.
4 years ago
b46dd5effd
Limit the number of messages 'Warning singular matrix: ...' to 6,
if not 'set ngdebug'
4 years ago
f7c5c93635
Make error message more verbose:
State explicitely when transient op has failed.
4 years ago
1e304c6e53
Prevent a crash when line is empty
4 years ago
e460b18f97
Allow 'nulltype', which returns NULL pointer.
Thus prevent a crash in cieq.
4 years ago
fc83328952
Rename the internal circuit nodes generated by .probe
to probe_int_xxx to make it probe specific.
Don't save these nodes.
4 years ago
9619b52180
Don't save the internal device node collCX, added
for a new quasi-saturation model of bjt
4 years ago
d93295136b
When plotting the phase, standard now is "Radiant".
Only with 'set units=degrees" we plot with unit Degree.
4 years ago
eb79e91175
This is a fix to bug report 589 by Bohdan Tkhir:
Remove only mfg=something, icrating=, vceo=, type=,
not any combination of text like net_type=... .
Restrict this removal to compatibility modes ps or lt.
4 years ago
Brian Taylor
Holger Vogt