3.7 KiB

Raw Blame History

Phase 3: Dell Owner's Manual Integration

Date: 2026-02-14 Goal: Parse the full Dell Pro Max GB10 FCM1253 Owner's Manual (Rev A01, Dec 2025, 45 pages) and integrate into knowledge base

Source

reference/sources/dell-pro-max-with-gb10-fcm1253-om-en-us.pdf
Extracted via PyMuPDF (fitz), all 45 pages parsed successfully

Critical Corrections Made

These findings from the authoritative Dell Owner's Manual contradict earlier data from web research and NVIDIA forums:

SSD is PCIe Gen4, NOT Gen5 — NVIDIA Developer Forums and Storage Review teardown claimed Gen5. Dell Owner's Manual (Rev A01, Dec 2025) says PCIe Gen4 NVMe, up to 64 GT/s.
Supports BOTH M.2 2230 AND M.2 2242 — Earlier research indicated 2242-only. Manual lists 2230 (1TB TLC, 2TB QLC) and 2242 (1TB/4TB TLC SED Opal 2.0).
HDMI is 2.1a, NOT 2.1b — Initial web research from Dell product page suggested 2.1b. Manual confirms 2.1a (matching DGX Spark spec).
Operating temperature range is 0-35°C (Dell), not 5-30°C (NVIDIA) — Dell's spec is wider. This may reflect Dell's improved thermal design.
Bottom cover screws are Torx (M2x4.4), not Phillips — Earlier sources said Phillips. Manual specifies T5 or T8 Torx screwdriver required.
Weight range is 1.22-1.34 kg — Not a single 1.31 kg figure. Varies by configuration.

New Data Added

Hardware Details

Processor cache: 16 MB
All ports are on the BACK (front has no ports)
Power button: press to turn on, hold 4 seconds to force shutdown
Service tag location: bottom of unit
Rubber base plate: magnetically attached, pry from left/right gaps
Bottom cover: 4x M2x4.4 Torx screws
SSD: 1x M2x2 screw, thermal pads on top and bottom
Required tools: Phillips #0, T5 or T8 Torx

Display Specifications

USB-C DP 1.4a: max 7680x4320 at 60 Hz (8K@60)
HDMI 2.1a: max 7680x4320 at 30 Hz (8K@30)
MST (Multi-Stream Transport): Not supported
Cable recommendation: connect right to left, ≤6.5mm width

Networking

Realtek RTL8127-CG (10GbE Ethernet controller)
AzureWave AW-EM637 Wi-Fi module (2.4/5/6 GHz)
Encryption: 128-bit AES-CCMP, 256-bit AES-GCMP, 256-bit AES-GMAC

Power Adapter

Dimensions: 23x78x162 mm
Input: 100-240VAC, 50-60Hz
Multi-voltage output: 48V/36V/28V/20V/15V/9V/5V

Environmental (Dell-specific)

Operating: 0-35°C, 10-90% humidity, -15.2m to 3048m altitude
Storage: -40 to 65°C, 0-95% humidity, -15.2m to 10668m altitude
Vibration: 0.66 GRMS operating, 1.30 GRMS storage
Shock: 110G operating, 160G storage (2ms half-sine)
Airborne contaminants: G1 per ISA-S71.04-1985

BIOS/UEFI (Full Structure)

Entry: Delete key at Dell logo (BIOS), F7 (one-time boot)
Navigation: F1=Help, F2=Restore, F3=Defaults, F4=Save&Exit, ESC=Exit
Menus: Main, Advanced, Security, Boot, Save & Exit
Advanced: Platform Configuration (iGPU Memory Carveout, DRAM Encryption, Watchdog Timer), Network Stack, NVMe Config with self-test, VLAN, TLS Auth
Security: Secure Boot, Media Sanitization, TCG Storage (Opal), Expert Key Management, password policies
Boot: Boot priorities, Fast Boot, Quiet Boot, custom boot options

SKU Details

2TB model uses M.2 2230 QLC (no SED)
4TB model uses M.2 2242 TLC with Opal 2.0 SED
Additional 1TB options exist (2230 TLC and 2242 TLC SED)

Troubleshooting

Network power cycle procedure (7 steps)
Force shutdown: hold power 4 seconds
NVMe self-test via BIOS

Files Updated

All 12 context files updated. 14 additional resolved questions added to open-questions.md.

Remaining Gaps

Figures/diagrams from manual are referenced but not visually captured (PDF images)
Full UEFI Manual (separate document referenced in Dell manual) not yet found
DGX Spark-specific BIOS differences (if any) unknown

3.7 KiB Raw Blame History