You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.

Tree: fe89da2b2c

pre-master-46

Branches Tags

${ item.name }

Create tag ${ searchTerm }

Create branch ${ searchTerm }

from 'fe89da2b2c'

${ noResults }

pyNgSpice/examples/probe

History

Francesco Lannutti fe89da2b2c Getting rid of SPARSE for Initial Circuit Matrix creation. Now KLU is totally independent from SPARSE. This opens up the interface for other solvers as well SPARSE can still used through '.options sparse', but it isn't possible to switch from KLU to SPARSE and viceversa at run-time		6 years ago
..
555-timer-2.cir	Update, link on device models (public domain or TI)	4 years ago
Dual-NMOS-amp.cir	If a node name to be plotted ends by ':power', its type is set to POWER.	4 years ago
F5TurboV2-Probe.cir	If a node name to be plotted ends by ':power', its type is set to POWER.	4 years ago
F5models.lib	Update, link on device models (public domain or TI)	4 years ago
TL072-dual.lib	.probe: various example netlists	4 years ago
TL072.301	.probe: various example netlists	4 years ago
TLC555.LIB	.probe: various example netlists	4 years ago
VDMOS_models.lib	.probe: various example netlists	4 years ago
ac-test.cir	.probe: various example netlists	4 years ago
cntrl-sources.cir	Replace end-of-line comment delimiter $ by ;	4 years ago
mos-test.cir	If a node name to be plotted ends by ':power', its type is set to POWER.	4 years ago
probe-i-dev.cir	If a node name to be plotted ends by ':power', its type is set to POWER.	4 years ago
switches-manual-p92.cir	Enable power measurement for W switch	4 years ago