| .. |
|
adms
|
Getting rid of SPARSE for Initial Circuit Matrix creation. Now KLU is totally independent from SPARSE. This opens up the interface for other solvers as well
|
3 years ago |
|
asrc
|
Add optional switch for separate bottom and sidewall diode model - configuration is dependent from model parameter RSW
|
4 months ago |
|
bjt
|
Add optional switch for separate bottom and sidewall diode model - configuration is dependent from model parameter RSW
|
4 months ago |
|
bsim1
|
Getting rid of SPARSE for Initial Circuit Matrix creation. Now KLU is totally independent from SPARSE. This opens up the interface for other solvers as well
|
3 years ago |
|
bsim2
|
Add optional switch for separate bottom and sidewall diode model - configuration is dependent from model parameter RSW
|
4 months ago |
|
bsim3
|
Add optional switch for separate bottom and sidewall diode model - configuration is dependent from model parameter RSW
|
4 months ago |
|
bsim3soi_dd
|
Getting rid of SPARSE for Initial Circuit Matrix creation. Now KLU is totally independent from SPARSE. This opens up the interface for other solvers as well
|
3 years ago |
|
bsim3soi_fd
|
Add optional switch for separate bottom and sidewall diode model - configuration is dependent from model parameter RSW
|
4 months ago |
|
bsim3soi_pd
|
Add optional switch for separate bottom and sidewall diode model - configuration is dependent from model parameter RSW
|
4 months ago |
|
bsim3v0
|
Getting rid of SPARSE for Initial Circuit Matrix creation. Now KLU is totally independent from SPARSE. This opens up the interface for other solvers as well
|
3 years ago |
|
bsim3v1
|
allow compile w/o NEWCONV defined
|
2 years ago |
|
bsim3v32
|
Add optional switch for separate bottom and sidewall diode model - configuration is dependent from model parameter RSW
|
4 months ago |
|
bsim4
|
Add optional switch for separate bottom and sidewall diode model - configuration is dependent from model parameter RSW
|
4 months ago |
|
bsim4v5
|
Add optional switch for separate bottom and sidewall diode model - configuration is dependent from model parameter RSW
|
4 months ago |
|
bsim4v6
|
Typo
|
6 months ago |
|
bsim4v7
|
extend bsim4 operating point info list
|
1 year ago |
|
bsimsoi
|
Add optional switch for separate bottom and sidewall diode model - configuration is dependent from model parameter RSW
|
4 months ago |
|
cap
|
Initial fix for Bug 710 -
|
1 year ago |
|
cccs
|
Add optional switch for separate bottom and sidewall diode model - configuration is dependent from model parameter RSW
|
4 months ago |
|
ccvs
|
Add optional switch for separate bottom and sidewall diode model - configuration is dependent from model parameter RSW
|
4 months ago |
|
cpl
|
Add optional switch for separate bottom and sidewall diode model - configuration is dependent from model parameter RSW
|
4 months ago |
|
csw
|
Getting rid of SPARSE for Initial Circuit Matrix creation. Now KLU is totally independent from SPARSE. This opens up the interface for other solvers as well
|
3 years ago |
|
dio
|
Add optional switch for separate bottom and sidewall diode model - configuration is dependent from model parameter RSW
|
4 months ago |
|
hfet1
|
Fix bug 711 reported by Sonia Edward
|
1 year ago |
|
hfet2
|
Add optional switch for separate bottom and sidewall diode model - configuration is dependent from model parameter RSW
|
4 months ago |
|
hicum2
|
Authorship for HICUM
|
2 years ago |
|
hisim2
|
Add optional switch for separate bottom and sidewall diode model - configuration is dependent from model parameter RSW
|
4 months ago |
|
hisimhv1
|
Add optional switch for separate bottom and sidewall diode model - configuration is dependent from model parameter RSW
|
4 months ago |
|
hisimhv2
|
Add optional switch for separate bottom and sidewall diode model - configuration is dependent from model parameter RSW
|
4 months ago |
|
ind
|
Add optional switch for separate bottom and sidewall diode model - configuration is dependent from model parameter RSW
|
4 months ago |
|
isrc
|
Update to V/I sources, SFFM and AM
|
2 years ago |
|
jfet
|
Temperature handling inconsistency in jfetnoise.c fixed.
|
10 months ago |
|
jfet2
|
dtemp bug fixed.
|
8 months ago |
|
ltra
|
Getting rid of SPARSE for Initial Circuit Matrix creation. Now KLU is totally independent from SPARSE. This opens up the interface for other solvers as well
|
3 years ago |
|
mes
|
MESFET m and ic parameters fixed.
|
8 months ago |
|
mesa
|
Getting rid of SPARSE for Initial Circuit Matrix creation. Now KLU is totally independent from SPARSE. This opens up the interface for other solvers as well
|
3 years ago |
|
mos1
|
Fixed MOS1 noise scaling.
|
10 months ago |
|
mos2
|
Fixed MOS2 scaling.
|
10 months ago |
|
mos3
|
Fixed MOS3 scaling.
|
10 months ago |
|
mos6
|
Add optional switch for separate bottom and sidewall diode model - configuration is dependent from model parameter RSW
|
4 months ago |
|
mos9
|
Fixed MOS9 scaling.
|
10 months ago |
|
nbjt
|
Add optional switch for separate bottom and sidewall diode model - configuration is dependent from model parameter RSW
|
4 months ago |
|
nbjt2
|
Enable CIDER with KLU for DC, OP, and TRAN analyses. Small signal AC analysis is not yet supported for CIDER complex valued device KLU matrices. The examples/cider testcases produce printed simulation result values which have slight differences between Sparse and KLU. Differences are probably expected and in a few cases are ~1-2%, sometimes a little more. This should be good enough for most CIDER analyses. Francesco did a good piece of work. Runtimes are significantly shorter with KLU.
|
7 months ago |
|
ndev
|
Add optional switch for separate bottom and sidewall diode model - configuration is dependent from model parameter RSW
|
4 months ago |
|
numd
|
Add optional switch for separate bottom and sidewall diode model - configuration is dependent from model parameter RSW
|
4 months ago |
|
numd2
|
Enable CIDER with KLU for DC, OP, and TRAN analyses. Small signal AC analysis is not yet supported for CIDER complex valued device KLU matrices. The examples/cider testcases produce printed simulation result values which have slight differences between Sparse and KLU. Differences are probably expected and in a few cases are ~1-2%, sometimes a little more. This should be good enough for most CIDER analyses. Francesco did a good piece of work. Runtimes are significantly shorter with KLU.
|
7 months ago |
|
numos
|
Enable CIDER with KLU for DC, OP, and TRAN analyses. Small signal AC analysis is not yet supported for CIDER complex valued device KLU matrices. The examples/cider testcases produce printed simulation result values which have slight differences between Sparse and KLU. Differences are probably expected and in a few cases are ~1-2%, sometimes a little more. This should be good enough for most CIDER analyses. Francesco did a good piece of work. Runtimes are significantly shorter with KLU.
|
7 months ago |
|
res
|
Initial fix for Bug 710 -
|
1 year ago |
|
soi3
|
Add optional switch for separate bottom and sidewall diode model - configuration is dependent from model parameter RSW
|
4 months ago |
|
sw
|
Add optional switch for separate bottom and sidewall diode model - configuration is dependent from model parameter RSW
|
4 months ago |
|
tra
|
A quick fix for a bug reported in the Help forum by Tom Hajjar on
|
2 years ago |
|
txl
|
Improve error message during setup of TXL or CPL
|
1 year ago |
|
urc
|
KLU Integration from scratch #5, devices
|
3 years ago |
|
vbic
|
Add optional switch for separate bottom and sidewall diode model - configuration is dependent from model parameter RSW
|
4 months ago |
|
vccs
|
Remove unused instance parameter ic (initial condition of controlling source).
|
3 years ago |
|
vcvs
|
Add optional switch for separate bottom and sidewall diode model - configuration is dependent from model parameter RSW
|
4 months ago |
|
vdmos
|
Add optional switch for separate bottom and sidewall diode model - configuration is dependent from model parameter RSW
|
4 months ago |
|
vsrc
|
Add optional switch for separate bottom and sidewall diode model - configuration is dependent from model parameter RSW
|
4 months ago |
|
ChangeLog
|
Integrated code from tclspice, brorson xspice and Vera memleak.
|
23 years ago |
|
Makefile.am
|
Remove ADMS related code
|
10 months ago |
|
cktaccept.c
|
For memcpy in PREDICTOR
|
3 years ago |
|
cktaccept.h
|
remove prototypes, avoid redeclarations
|
16 years ago |
|
cktask.c
|
free errMsg only if available
|
6 years ago |
|
cktbindnode.c
|
GENmodel, GENinstance, change layout, #4/4, complete the change
|
8 years ago |
|
cktcrte.c
|
Add another error qualifier to decribe the current policy
|
3 years ago |
|
cktfinddev.c
|
Add comment
|
3 years ago |
|
cktinit.c
|
Per-device load timing support.
|
10 months ago |
|
cktsoachk.c
|
introduce CKTsoaInit()
|
12 years ago |
|
dev.c
|
Remove ADMS related code
|
10 months ago |
|
dev.h
|
prototype for Verilog-A integration using OSDI and OpenVAF
|
3 years ago |
|
devsup.c
|
Don't show message for every iteration
|
5 years ago |
|
limit.c
|
#1/4 #include <ngspice/...> --> #include "ngspice/..."
|
14 years ago |
dwarning
284d4308db