22a10c0e44
typo
2 years ago
55ba927973
If nan occurs during op calculation, issue the warning
no more than 10 times.
2 years ago
4da3dc51fd
If compatmode ps or lt: add a series resistance (100µOhms) to
diodes, when RS is not given or 0:
Improves convergence in behavioural models for op evaluation.
2 years ago
29bfe94318
Exclude some code under a unified #undef REM_USED
2 years ago
2cf2693706
few code cleanings
2 years ago
2a005292db
Sparse 1.3 is the matrix solver if no option (sparse or klu) is given.
KLU is selected by 'option klu'
If both 'option klu' and 'option sparse' are given,
the last one executed determines the solver.
'option sparse=0' de-selects spares, i.e. selects klu.
'option klu=0' de-selects klu, selects sparse.
'option klu=1' has the same meaning as 'option klu'.
'option sparse=1' has the same meaning as 'option sparse'.
2 years ago
5645968510
compiling with klu is now standard
2 years ago
c87df54f24
Remove unused global variable cp_dol.
This also prevents a gcc 13 bug, as cp_dol has been set to '\0'
by -O2 optimization (see
https://stackoverflow.com/questions/77407156/s-0-being-optimized-out-possible-gcc-13-bug-or-some-undefined-behaviour )
2 years ago
02aa2c03f9
klu is now compiled-in as standard
2 years ago
359e3d4609
Fix Bug #467 - ".OPTION INTERP has accuracy issue".
2 years ago
10386ee3e3
Commit [35d338]ngspice partly reverted commit 423f9a9db to fix deletion
of source files if make was accidentally used in the source tree.
That caused the original bug to return. Fix the problem by deleting
the generated source files by name (no such files exist in source.
Also make the generated files depend on cmpp, making 'make clean'
unnecessary after a chenge to cmpp.
2 years ago
f6f7319792
Add null-pointer checks to some code that crashed when trying
to .print results from a non-existent analysis. Also remove the
troublesome .plot and .print lines from two examples.
2 years ago
4228ba6e8a
Ignore end-of-line comments in quoted strings.
2 years ago
0a087809d6
If both node names are the same, just print them once in the error message.
2 years ago
0555c5d9c7
Make previous KLU support check more transparent.
2 years ago
295f212de8
When CIDER is detected, until KLU works with CIDER, print Error: CIDER simulation is not (yet) supported with 'option klu'. Use 'option sparse' instead. and then call controlled exit(1).
2 years ago
35d338f256
partly revert commit 423f9a9db - don't remove xspice/icm .c files
2 years ago
d27b888f13
Noise simulation is buggy when using the KLU solver. Thus for now it is disabled.
Use 'option sparse' instead.
2 years ago
4e1452cdb7
rm compiler warnings
2 years ago
42f882e4e4
add osdinoise.c
2 years ago
e67a6a1297
add osdinoise
2 years ago
5223f4b27d
fix(hicuml2): ensure flicker noise power is always stored in state vec
2 years ago
c21f87051a
always compute osdi noise powers
ngspice will reuse operating points for noise analysis so we can not trust
the mode flags
2 years ago
826cddb483
add examples for OSDI noise
2 years ago
f66e0bf2ac
implement osdi noise support
2 years ago
04c68d5f30
Cleanup child processes on Windows VisualC and Mingw. On Linux those processes quit when ngspice quits.
2 years ago
864ef7925c
Add notes on the structure and organization of an external d_process program.
2 years ago
4219efb5d5
Make it explicit that null output ports are not allowed. The output port vector bounds are always >= 1.
2 years ago
5c6b9f03b5
Fix the zero count.
2 years ago
1f5f7ae439
Update d_process examples.
2 years ago
c83d11c9c0
Call cm_cexit() to prevent the simulator running when d_process initialization errors occur.
2 years ago
21761207bc
Change license to 3-clause BSD (see
https://sourceforge.net/p/ngspice/ngspice/merge-requests/6/?limit=25#fd4f/73e6 )
2 years ago
09f070f582
Error handling improvements in cfunc.mod. Ensure that d_process.h wiil always respond to version and interface checks sent from sendheader. This is needed so that the pipe reads in sendheader do not cause Windows to hang when the interface version and in/out counts do not match. This hang was the cause of errors not being reported and the Windows gui hanging. Startup and header checks are now detected in cm_d_process, and the simulator will run but with runtime errors since a d_process model cannot be completely instantiated after initial errors. It would be good to find a means of gracefully halting the simulation run.
2 years ago
8c72a76844
Another attempt at clean up of error handling and reporting. It's OK on limux and cygwin, but Windows VisualC is being stubborn. I would prefer not to have to call exit(1) just for Windows, since then nothing is reported and the gui disappears in a puff of smoke. Even without the exit calls nothing gets reported with the Windows gui which will hang when there are errors detected by d_process.
2 years ago
4eae039779
Add modifications note.
2 years ago
4530cde8e2
Use Xspice cm_message_send to report errors rathen than printing to stderr and calling exit. When a d_process model has errors found in start(), sendheader(), and dprocess_exchangedata() these are reported, but if the model is run a SIGINT is raised. There must be a better way of stopping the simulator.
2 years ago
182764a894
Add examples/xspice/d_process.
2 years ago
df28fabc42
Restore the deleted unused params to be backword compatible. Handle the case where the d_process instance has a null in vector, so that N_din is zero. This allows the model to be just a pattern generator. Add include to cmproto.h to avoid a forward ref. to an enum type.
2 years ago
307ba1985b
Remove unused reset_state param; do not allow null in and out, so there is at least 1 input and 1 output.
2 years ago
7820940be3
Remove the unused reset_delay param.
2 years ago
e762047fc2
Add array bounds check, fix typos.
2 years ago
022a340ddb
Fix VisualC and Mingw compiler warnings.
3 years ago
cccb4a1559
Add callback to free process memory.
3 years ago
33780055ee
Add MODIFICATIONS note, cleanup white space.
3 years ago
5c4352d02f
Add __MINGW64__ defines for builds on mingw with msys.
3 years ago
3bb6e86015
Add Windows Visual Studio support for the Isotel d_process xspice digital model. The Isotel mixedsim-master/examples/embedded/motorforce C code needs to have minor changes for _MSC_VER defines, and are not included with this commit. The changes relate to using #pragma pack(push, 1)...#pragma pack(pop) around some structs, and setting stdin/stdout in binary mode. It is doubtful that the cfunc.mod will compile on mingw or cygwin since I don't know if they support pipe/fork/exec/spawn calls. The code builds and runs on Windows, Linux, and MacOS. In the future, Giles Atkinson is looking at allowing Xspice models to load shared libraries (.dll, .so) which will avoid creating and communicating with an external program.
3 years ago
046be0cdc8
Use the PSP103 model pspnqs103va (including nqs option)
as this is the standard in the IHP Open PDK.
2 years ago
efdf332061
Prevent a crash if hash model table was not generated,
e.g. due to missing valid models.
2 years ago
ce82c839e3
dependent project klu_complex added
2 years ago
10d7297798
Add cm_cecit(). If the input file could not be opened, stop ngspice.
2 years ago
Holger Vogt
dwarning
Giles Atkinson
Brian Taylor
Pascal Kuthe
Pascal Kuthe