diff --git a/ChangeLog b/ChangeLog index bf117e7fb..099a65b6d 100644 --- a/ChangeLog +++ b/ChangeLog @@ -1,3 +1,8 @@ +2004-08-09 Paolo Nenzi + + * Updated and corrected test files in "tests" directory. Added + "examples" directory. + 2004-07-08 Paolo Nenzi * Applied Al Niessner negabyte patch diff --git a/Makefile.am b/Makefile.am index 7782681dc..ea2b505f0 100644 --- a/Makefile.am +++ b/Makefile.am @@ -1,7 +1,7 @@ ## Process this file with automake to produce Makefile.in SUBDIRS = @XGRAPHDIR@ doc src man tests -DIST_SUBDIRS = xgraph doc src man tests +DIST_SUBDIRS = xgraph doc src man tests examples EXTRA_DIST = FAQ acconfig.h autogen.sh Stuarts_Poly_Notes \ ANALYSES BUGS AUTHORS ChangeLog \ diff --git a/configure.in b/configure.in index 35b8cfad8..e5171e28e 100644 --- a/configure.in +++ b/configure.in @@ -487,6 +487,7 @@ else XSPCIEDIR="" XSPICELIB1="" XSPICELIB2="" + XSPICETESTS="" fi AC_SUBST(XSPICEDIR) AC_SUBST(XSPICELIB1) @@ -497,8 +498,6 @@ if test "$enable_cider" = "yes"; then AC_MSG_RESULT(CIDER features enabled) AC_DEFINE(CIDER) - CIDERTESTS="cider" - CIDERDIR="ciderlib" CIDERSIM=" $CIDERDIR/twod/libcidertwod.a \ @@ -531,7 +530,6 @@ else NUMDEV="" NUMDEVDIR="" CIDERSCRIPTS="" - CIDERTESTS="" fi AC_SUBST(CIDERDIR) AC_SUBST(CIDERSIM) @@ -540,7 +538,6 @@ AC_SUBST(CIDERMATHDIR) AC_SUBST(NUMDEV) AC_SUBST(NUMDEVDIR) AC_SUBST(CIDERSCRIPTS) -AC_SUBST(CIDERTESTS) dnl Cluster option if test "$enable_cluster" = "yes"; then @@ -676,7 +673,6 @@ src/xspice/enh/Makefile \ src/xspice/ipc/Makefile \ src/xspice/idn/Makefile \ tests/Makefile \ -tests/TransImpedanceAmp/Makefile \ tests/bsim1/Makefile \ tests/bsim2/Makefile \ tests/bsim3/Makefile \ @@ -697,15 +693,6 @@ tests/bsim3soidd/Makefile \ tests/bsim3soifd/Makefile \ tests/bsim3soipd/Makefile \ tests/bsim4/Makefile \ -tests/cider/Makefile \ -tests/cider/bicmos/Makefile \ -tests/cider/bjt/Makefile \ -tests/cider/diode/Makefile \ -tests/cider/jfet/Makefile \ -tests/cider/mos/Makefile \ -tests/cider/parallel/Makefile \ -tests/cider/resistor/Makefile \ -tests/cider/serial/Makefile \ tests/filters/Makefile \ tests/general/Makefile \ tests/hfet/Makefile \ @@ -715,7 +702,8 @@ tests/mes/Makefile \ tests/mesa/Makefile \ tests/mos6/Makefile \ tests/polezero/Makefile \ -tests/proc2mod/Makefile \ +tests/sensitivity/Makefile \ +tests/transient/Makefile \ tests/transmission/Makefile \ tests/resistance/Makefile \ tests/vbic/Makefile diff --git a/doc/ngspice.texi b/doc/ngspice.texi index 2211ab948..24a38aeff 100644 --- a/doc/ngspice.texi +++ b/doc/ngspice.texi @@ -171,10 +171,7 @@ within the limitations of the tools. @comment node-name, next, previous, up @chapter Acknowledgements -@c FIXME: Get this baby to work with make distcheck target. -@c -@include ../AUTHORS - +See the AUTHORS file in distribution directory. @node Release Notes, Introduction, Acknowledgements, Top @comment node-name, next, previous, up diff --git a/src/xspice/icm/Makefile b/src/xspice/icm/Makefile index 6640e3fec..9c6149724 100644 --- a/src/xspice/icm/Makefile +++ b/src/xspice/icm/Makefile @@ -133,6 +133,9 @@ maintainer-clean-generic: clean -test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES) +distclean: maintainer-clean + distdir: +check: diff --git a/src/xspice/icm/Makefile.am b/src/xspice/icm/Makefile.am index fbdd5a786..f0da64f42 100755 --- a/src/xspice/icm/Makefile.am +++ b/src/xspice/icm/Makefile.am @@ -192,3 +192,7 @@ spice2poly.cm: $(SUBDIRS)/cfunc.o $(SUBDIRS)/ifspec.o dlmain.o dlmain.o: dlmain.c cmextrn.h udnextrn.h cminfo.h udninfo.h $(CC) -fPIC -I$(OPUS_INCLUDE_DIR) $(INCLUDES) $(CFLAGS) -DCM_LINUX -c dlmain.c + +distclean: clean + +check: diff --git a/xgraph/depcomp b/xgraph/depcomp new file mode 100755 index 000000000..25bdb1889 --- /dev/null +++ b/xgraph/depcomp @@ -0,0 +1,526 @@ +#! /bin/sh +# depcomp - compile a program generating dependencies as side-effects + +scriptversion=2004-04-25.13 + +# Copyright (C) 1999, 2000, 2003, 2004 Free Software Foundation, Inc. + +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2, or (at your option) +# any later version. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. + +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA +# 02111-1307, USA. + +# As a special exception to the GNU General Public License, if you +# distribute this file as part of a program that contains a +# configuration script generated by Autoconf, you may include it under +# the same distribution terms that you use for the rest of that program. + +# Originally written by Alexandre Oliva . + +case $1 in + '') + echo "$0: No command. Try \`$0 --help' for more information." 1>&2 + exit 1; + ;; + -h | --h*) + cat <<\EOF +Usage: depcomp [--help] [--version] PROGRAM [ARGS] + +Run PROGRAMS ARGS to compile a file, generating dependencies +as side-effects. + +Environment variables: + depmode Dependency tracking mode. + source Source file read by `PROGRAMS ARGS'. + object Object file output by `PROGRAMS ARGS'. + depfile Dependency file to output. + tmpdepfile Temporary file to use when outputing dependencies. + libtool Whether libtool is used (yes/no). + +Report bugs to . +EOF + exit 0 + ;; + -v | --v*) + echo "depcomp $scriptversion" + exit 0 + ;; +esac + +if test -z "$depmode" || test -z "$source" || test -z "$object"; then + echo "depcomp: Variables source, object and depmode must be set" 1>&2 + exit 1 +fi +# `libtool' can also be set to `yes' or `no'. + +if test -z "$depfile"; then + base=`echo "$object" | sed -e 's,^.*/,,' -e 's,\.\([^.]*\)$,.P\1,'` + dir=`echo "$object" | sed 's,/.*$,/,'` + if test "$dir" = "$object"; then + dir= + fi + # FIXME: should be _deps on DOS. + depfile="$dir.deps/$base" +fi + +tmpdepfile=${tmpdepfile-`echo "$depfile" | sed 's/\.\([^.]*\)$/.T\1/'`} + +rm -f "$tmpdepfile" + +# Some modes work just like other modes, but use different flags. We +# parameterize here, but still list the modes in the big case below, +# to make depend.m4 easier to write. Note that we *cannot* use a case +# here, because this file can only contain one case statement. +if test "$depmode" = hp; then + # HP compiler uses -M and no extra arg. + gccflag=-M + depmode=gcc +fi + +if test "$depmode" = dashXmstdout; then + # This is just like dashmstdout with a different argument. + dashmflag=-xM + depmode=dashmstdout +fi + +case "$depmode" in +gcc3) +## gcc 3 implements dependency tracking that does exactly what +## we want. Yay! Note: for some reason libtool 1.4 doesn't like +## it if -MD -MP comes after the -MF stuff. Hmm. + "$@" -MT "$object" -MD -MP -MF "$tmpdepfile" + stat=$? + if test $stat -eq 0; then : + else + rm -f "$tmpdepfile" + exit $stat + fi + mv "$tmpdepfile" "$depfile" + ;; + +gcc) +## There are various ways to get dependency output from gcc. Here's +## why we pick this rather obscure method: +## - Don't want to use -MD because we'd like the dependencies to end +## up in a subdir. Having to rename by hand is ugly. +## (We might end up doing this anyway to support other compilers.) +## - The DEPENDENCIES_OUTPUT environment variable makes gcc act like +## -MM, not -M (despite what the docs say). +## - Using -M directly means running the compiler twice (even worse +## than renaming). + if test -z "$gccflag"; then + gccflag=-MD, + fi + "$@" -Wp,"$gccflag$tmpdepfile" + stat=$? + if test $stat -eq 0; then : + else + rm -f "$tmpdepfile" + exit $stat + fi + rm -f "$depfile" + echo "$object : \\" > "$depfile" + alpha=ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz +## The second -e expression handles DOS-style file names with drive letters. + sed -e 's/^[^:]*: / /' \ + -e 's/^['$alpha']:\/[^:]*: / /' < "$tmpdepfile" >> "$depfile" +## This next piece of magic avoids the `deleted header file' problem. +## The problem is that when a header file which appears in a .P file +## is deleted, the dependency causes make to die (because there is +## typically no way to rebuild the header). We avoid this by adding +## dummy dependencies for each header file. Too bad gcc doesn't do +## this for us directly. + tr ' ' ' +' < "$tmpdepfile" | +## Some versions of gcc put a space before the `:'. On the theory +## that the space means something, we add a space to the output as +## well. +## Some versions of the HPUX 10.20 sed can't process this invocation +## correctly. Breaking it into two sed invocations is a workaround. + sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile" + rm -f "$tmpdepfile" + ;; + +hp) + # This case exists only to let depend.m4 do its work. It works by + # looking at the text of this script. This case will never be run, + # since it is checked for above. + exit 1 + ;; + +sgi) + if test "$libtool" = yes; then + "$@" "-Wp,-MDupdate,$tmpdepfile" + else + "$@" -MDupdate "$tmpdepfile" + fi + stat=$? + if test $stat -eq 0; then : + else + rm -f "$tmpdepfile" + exit $stat + fi + rm -f "$depfile" + + if test -f "$tmpdepfile"; then # yes, the sourcefile depend on other files + echo "$object : \\" > "$depfile" + + # Clip off the initial element (the dependent). Don't try to be + # clever and replace this with sed code, as IRIX sed won't handle + # lines with more than a fixed number of characters (4096 in + # IRIX 6.2 sed, 8192 in IRIX 6.5). We also remove comment lines; + # the IRIX cc adds comments like `#:fec' to the end of the + # dependency line. + tr ' ' ' +' < "$tmpdepfile" \ + | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' | \ + tr ' +' ' ' >> $depfile + echo >> $depfile + + # The second pass generates a dummy entry for each header file. + tr ' ' ' +' < "$tmpdepfile" \ + | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' -e 's/$/:/' \ + >> $depfile + else + # The sourcefile does not contain any dependencies, so just + # store a dummy comment line, to avoid errors with the Makefile + # "include basename.Plo" scheme. + echo "#dummy" > "$depfile" + fi + rm -f "$tmpdepfile" + ;; + +aix) + # The C for AIX Compiler uses -M and outputs the dependencies + # in a .u file. In older versions, this file always lives in the + # current directory. Also, the AIX compiler puts `$object:' at the + # start of each line; $object doesn't have directory information. + # Version 6 uses the directory in both cases. + stripped=`echo "$object" | sed 's/\(.*\)\..*$/\1/'` + tmpdepfile="$stripped.u" + if test "$libtool" = yes; then + "$@" -Wc,-M + else + "$@" -M + fi + stat=$? + + if test -f "$tmpdepfile"; then : + else + stripped=`echo "$stripped" | sed 's,^.*/,,'` + tmpdepfile="$stripped.u" + fi + + if test $stat -eq 0; then : + else + rm -f "$tmpdepfile" + exit $stat + fi + + if test -f "$tmpdepfile"; then + outname="$stripped.o" + # Each line is of the form `foo.o: dependent.h'. + # Do two passes, one to just change these to + # `$object: dependent.h' and one to simply `dependent.h:'. + sed -e "s,^$outname:,$object :," < "$tmpdepfile" > "$depfile" + sed -e "s,^$outname: \(.*\)$,\1:," < "$tmpdepfile" >> "$depfile" + else + # The sourcefile does not contain any dependencies, so just + # store a dummy comment line, to avoid errors with the Makefile + # "include basename.Plo" scheme. + echo "#dummy" > "$depfile" + fi + rm -f "$tmpdepfile" + ;; + +icc) + # Intel's C compiler understands `-MD -MF file'. However on + # icc -MD -MF foo.d -c -o sub/foo.o sub/foo.c + # ICC 7.0 will fill foo.d with something like + # foo.o: sub/foo.c + # foo.o: sub/foo.h + # which is wrong. We want: + # sub/foo.o: sub/foo.c + # sub/foo.o: sub/foo.h + # sub/foo.c: + # sub/foo.h: + # ICC 7.1 will output + # foo.o: sub/foo.c sub/foo.h + # and will wrap long lines using \ : + # foo.o: sub/foo.c ... \ + # sub/foo.h ... \ + # ... + + "$@" -MD -MF "$tmpdepfile" + stat=$? + if test $stat -eq 0; then : + else + rm -f "$tmpdepfile" + exit $stat + fi + rm -f "$depfile" + # Each line is of the form `foo.o: dependent.h', + # or `foo.o: dep1.h dep2.h \', or ` dep3.h dep4.h \'. + # Do two passes, one to just change these to + # `$object: dependent.h' and one to simply `dependent.h:'. + sed "s,^[^:]*:,$object :," < "$tmpdepfile" > "$depfile" + # Some versions of the HPUX 10.20 sed can't process this invocation + # correctly. Breaking it into two sed invocations is a workaround. + sed 's,^[^:]*: \(.*\)$,\1,;s/^\\$//;/^$/d;/:$/d' < "$tmpdepfile" | + sed -e 's/$/ :/' >> "$depfile" + rm -f "$tmpdepfile" + ;; + +tru64) + # The Tru64 compiler uses -MD to generate dependencies as a side + # effect. `cc -MD -o foo.o ...' puts the dependencies into `foo.o.d'. + # At least on Alpha/Redhat 6.1, Compaq CCC V6.2-504 seems to put + # dependencies in `foo.d' instead, so we check for that too. + # Subdirectories are respected. + dir=`echo "$object" | sed -e 's|/[^/]*$|/|'` + test "x$dir" = "x$object" && dir= + base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'` + + if test "$libtool" = yes; then + # Dependencies are output in .lo.d with libtool 1.4. + # They are output in .o.d with libtool 1.5. + tmpdepfile1="$dir.libs/$base.lo.d" + tmpdepfile2="$dir.libs/$base.o.d" + tmpdepfile3="$dir.libs/$base.d" + "$@" -Wc,-MD + else + tmpdepfile1="$dir$base.o.d" + tmpdepfile2="$dir$base.d" + tmpdepfile3="$dir$base.d" + "$@" -MD + fi + + stat=$? + if test $stat -eq 0; then : + else + rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" + exit $stat + fi + + if test -f "$tmpdepfile1"; then + tmpdepfile="$tmpdepfile1" + elif test -f "$tmpdepfile2"; then + tmpdepfile="$tmpdepfile2" + else + tmpdepfile="$tmpdepfile3" + fi + if test -f "$tmpdepfile"; then + sed -e "s,^.*\.[a-z]*:,$object:," < "$tmpdepfile" > "$depfile" + # That's a tab and a space in the []. + sed -e 's,^.*\.[a-z]*:[ ]*,,' -e 's,$,:,' < "$tmpdepfile" >> "$depfile" + else + echo "#dummy" > "$depfile" + fi + rm -f "$tmpdepfile" + ;; + +#nosideeffect) + # This comment above is used by automake to tell side-effect + # dependency tracking mechanisms from slower ones. + +dashmstdout) + # Important note: in order to support this mode, a compiler *must* + # always write the preprocessed file to stdout, regardless of -o. + "$@" || exit $? + + # Remove the call to Libtool. + if test "$libtool" = yes; then + while test $1 != '--mode=compile'; do + shift + done + shift + fi + + # Remove `-o $object'. + IFS=" " + for arg + do + case $arg in + -o) + shift + ;; + $object) + shift + ;; + *) + set fnord "$@" "$arg" + shift # fnord + shift # $arg + ;; + esac + done + + test -z "$dashmflag" && dashmflag=-M + # Require at least two characters before searching for `:' + # in the target name. This is to cope with DOS-style filenames: + # a dependency such as `c:/foo/bar' could be seen as target `c' otherwise. + "$@" $dashmflag | + sed 's:^[ ]*[^: ][^:][^:]*\:[ ]*:'"$object"'\: :' > "$tmpdepfile" + rm -f "$depfile" + cat < "$tmpdepfile" > "$depfile" + tr ' ' ' +' < "$tmpdepfile" | \ +## Some versions of the HPUX 10.20 sed can't process this invocation +## correctly. Breaking it into two sed invocations is a workaround. + sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile" + rm -f "$tmpdepfile" + ;; + +dashXmstdout) + # This case only exists to satisfy depend.m4. It is never actually + # run, as this mode is specially recognized in the preamble. + exit 1 + ;; + +makedepend) + "$@" || exit $? + # Remove any Libtool call + if test "$libtool" = yes; then + while test $1 != '--mode=compile'; do + shift + done + shift + fi + # X makedepend + shift + cleared=no + for arg in "$@"; do + case $cleared in + no) + set ""; shift + cleared=yes ;; + esac + case "$arg" in + -D*|-I*) + set fnord "$@" "$arg"; shift ;; + # Strip any option that makedepend may not understand. Remove + # the object too, otherwise makedepend will parse it as a source file. + -*|$object) + ;; + *) + set fnord "$@" "$arg"; shift ;; + esac + done + obj_suffix="`echo $object | sed 's/^.*\././'`" + touch "$tmpdepfile" + ${MAKEDEPEND-makedepend} -o"$obj_suffix" -f"$tmpdepfile" "$@" + rm -f "$depfile" + cat < "$tmpdepfile" > "$depfile" + sed '1,2d' "$tmpdepfile" | tr ' ' ' +' | \ +## Some versions of the HPUX 10.20 sed can't process this invocation +## correctly. Breaking it into two sed invocations is a workaround. + sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile" + rm -f "$tmpdepfile" "$tmpdepfile".bak + ;; + +cpp) + # Important note: in order to support this mode, a compiler *must* + # always write the preprocessed file to stdout. + "$@" || exit $? + + # Remove the call to Libtool. + if test "$libtool" = yes; then + while test $1 != '--mode=compile'; do + shift + done + shift + fi + + # Remove `-o $object'. + IFS=" " + for arg + do + case $arg in + -o) + shift + ;; + $object) + shift + ;; + *) + set fnord "$@" "$arg" + shift # fnord + shift # $arg + ;; + esac + done + + "$@" -E | + sed -n '/^# [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' | + sed '$ s: \\$::' > "$tmpdepfile" + rm -f "$depfile" + echo "$object : \\" > "$depfile" + cat < "$tmpdepfile" >> "$depfile" + sed < "$tmpdepfile" '/^$/d;s/^ //;s/ \\$//;s/$/ :/' >> "$depfile" + rm -f "$tmpdepfile" + ;; + +msvisualcpp) + # Important note: in order to support this mode, a compiler *must* + # always write the preprocessed file to stdout, regardless of -o, + # because we must use -o when running libtool. + "$@" || exit $? + IFS=" " + for arg + do + case "$arg" in + "-Gm"|"/Gm"|"-Gi"|"/Gi"|"-ZI"|"/ZI") + set fnord "$@" + shift + shift + ;; + *) + set fnord "$@" "$arg" + shift + shift + ;; + esac + done + "$@" -E | + sed -n '/^#line [0-9][0-9]* "\([^"]*\)"/ s::echo "`cygpath -u \\"\1\\"`":p' | sort | uniq > "$tmpdepfile" + rm -f "$depfile" + echo "$object : \\" > "$depfile" + . "$tmpdepfile" | sed 's% %\\ %g' | sed -n '/^\(.*\)$/ s:: \1 \\:p' >> "$depfile" + echo " " >> "$depfile" + . "$tmpdepfile" | sed 's% %\\ %g' | sed -n '/^\(.*\)$/ s::\1\::p' >> "$depfile" + rm -f "$tmpdepfile" + ;; + +none) + exec "$@" + ;; + +*) + echo "Unknown depmode $depmode" 1>&2 + exit 1 + ;; +esac + +exit 0 + +# Local Variables: +# mode: shell-script +# sh-indentation: 2 +# eval: (add-hook 'write-file-hooks 'time-stamp) +# time-stamp-start: "scriptversion=" +# time-stamp-format: "%:y-%02m-%02d.%02H" +# time-stamp-end: "$" +# End: diff --git a/xgraph/missing b/xgraph/missing index 7789652e8..e7ef83a1c 100755 --- a/xgraph/missing +++ b/xgraph/missing @@ -1,7 +1,11 @@ #! /bin/sh # Common stub for a few missing GNU programs while installing. -# Copyright (C) 1996, 1997 Free Software Foundation, Inc. -# Franc,ois Pinard , 1996. + +scriptversion=2003-09-02.23 + +# Copyright (C) 1996, 1997, 1999, 2000, 2002, 2003 +# Free Software Foundation, Inc. +# Originally by Fran,cois Pinard , 1996. # This program is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by @@ -18,11 +22,48 @@ # Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA # 02111-1307, USA. +# As a special exception to the GNU General Public License, if you +# distribute this file as part of a program that contains a +# configuration script generated by Autoconf, you may include it under +# the same distribution terms that you use for the rest of that program. + if test $# -eq 0; then echo 1>&2 "Try \`$0 --help' for more information" exit 1 fi +run=: + +# In the cases where this matters, `missing' is being run in the +# srcdir already. +if test -f configure.ac; then + configure_ac=configure.ac +else + configure_ac=configure.in +fi + +msg="missing on your system" + +case "$1" in +--run) + # Try to run requested program, and just exit if it succeeds. + run= + shift + "$@" && exit 0 + # Exit code 63 means version mismatch. This often happens + # when the user try to use an ancient version of a tool on + # a file that requires a minimum version. In this case we + # we should proceed has if the program had been absent, or + # if --run hadn't been passed. + if test $? = 63; then + run=: + msg="probably too old" + fi + ;; +esac + +# If it does not exist, or fails to run (possibly an outdated version), +# try to emulate it. case "$1" in -h|--h|--he|--hel|--help) @@ -35,6 +76,7 @@ error status if there is no known handling for PROGRAM. Options: -h, --help display this help and exit -v, --version output version information and exit + --run try to run the given command, and emulate it if it fails Supported PROGRAM values: aclocal touch file \`aclocal.m4' @@ -43,13 +85,17 @@ Supported PROGRAM values: automake touch all \`Makefile.in' files bison create \`y.tab.[ch]', if possible, from existing .[ch] flex create \`lex.yy.c', if possible, from existing .c + help2man touch the output file lex create \`lex.yy.c', if possible, from existing .c makeinfo touch the output file - yacc create \`y.tab.[ch]', if possible, from existing .[ch]" + tar try tar, gnutar, gtar, then tar without non-portable flags + yacc create \`y.tab.[ch]', if possible, from existing .[ch] + +Send bug reports to ." ;; -v|--v|--ve|--ver|--vers|--versi|--versio|--version) - echo "missing - GNU libit 0.0" + echo "missing $scriptversion (GNU Automake)" ;; -*) @@ -58,31 +104,46 @@ Supported PROGRAM values: exit 1 ;; - aclocal) + aclocal*) + if test -z "$run" && ($1 --version) > /dev/null 2>&1; then + # We have it, but it failed. + exit 1 + fi + echo 1>&2 "\ -WARNING: \`$1' is missing on your system. You should only need it if - you modified \`acinclude.m4' or \`configure.in'. You might want +WARNING: \`$1' is $msg. You should only need it if + you modified \`acinclude.m4' or \`${configure_ac}'. You might want to install the \`Automake' and \`Perl' packages. Grab them from any GNU archive site." touch aclocal.m4 ;; autoconf) + if test -z "$run" && ($1 --version) > /dev/null 2>&1; then + # We have it, but it failed. + exit 1 + fi + echo 1>&2 "\ -WARNING: \`$1' is missing on your system. You should only need it if - you modified \`configure.in'. You might want to install the +WARNING: \`$1' is $msg. You should only need it if + you modified \`${configure_ac}'. You might want to install the \`Autoconf' and \`GNU m4' packages. Grab them from any GNU archive site." touch configure ;; autoheader) + if test -z "$run" && ($1 --version) > /dev/null 2>&1; then + # We have it, but it failed. + exit 1 + fi + echo 1>&2 "\ -WARNING: \`$1' is missing on your system. You should only need it if - you modified \`acconfig.h' or \`configure.in'. You might want +WARNING: \`$1' is $msg. You should only need it if + you modified \`acconfig.h' or \`${configure_ac}'. You might want to install the \`Autoconf' and \`GNU m4' packages. Grab them from any GNU archive site." - files=`sed -n 's/^[ ]*A[CM]_CONFIG_HEADER(\([^)]*\)).*/\1/p' configure.in` + files=`sed -n 's/^[ ]*A[CM]_CONFIG_HEADER(\([^)]*\)).*/\1/p' ${configure_ac}` test -z "$files" && files="config.h" touch_files= for f in $files; do @@ -95,10 +156,15 @@ WARNING: \`$1' is missing on your system. You should only need it if touch $touch_files ;; - automake) + automake*) + if test -z "$run" && ($1 --version) > /dev/null 2>&1; then + # We have it, but it failed. + exit 1 + fi + echo 1>&2 "\ -WARNING: \`$1' is missing on your system. You should only need it if - you modified \`Makefile.am', \`acinclude.m4' or \`configure.in'. +WARNING: \`$1' is $msg. You should only need it if + you modified \`Makefile.am', \`acinclude.m4' or \`${configure_ac}'. You might want to install the \`Automake' and \`Perl' packages. Grab them from any GNU archive site." find . -type f -name Makefile.am -print | @@ -106,9 +172,37 @@ WARNING: \`$1' is missing on your system. You should only need it if while read f; do touch "$f"; done ;; + autom4te) + if test -z "$run" && ($1 --version) > /dev/null 2>&1; then + # We have it, but it failed. + exit 1 + fi + + echo 1>&2 "\ +WARNING: \`$1' is needed, but is $msg. + You might have modified some files without having the + proper tools for further handling them. + You can get \`$1' as part of \`Autoconf' from any GNU + archive site." + + file=`echo "$*" | sed -n 's/.*--output[ =]*\([^ ]*\).*/\1/p'` + test -z "$file" && file=`echo "$*" | sed -n 's/.*-o[ ]*\([^ ]*\).*/\1/p'` + if test -f "$file"; then + touch $file + else + test -z "$file" || exec >$file + echo "#! /bin/sh" + echo "# Created by GNU Automake missing as a replacement of" + echo "# $ $@" + echo "exit 0" + chmod +x $file + exit 1 + fi + ;; + bison|yacc) echo 1>&2 "\ -WARNING: \`$1' is missing on your system. You should only need it if +WARNING: \`$1' $msg. You should only need it if you modified a \`.y' file. You may need the \`Bison' package in order for those modifications to take effect. You can get \`Bison' from any GNU archive site." @@ -138,7 +232,7 @@ WARNING: \`$1' is missing on your system. You should only need it if lex|flex) echo 1>&2 "\ -WARNING: \`$1' is missing on your system. You should only need it if +WARNING: \`$1' is $msg. You should only need it if you modified a \`.l' file. You may need the \`Flex' package in order for those modifications to take effect. You can get \`Flex' from any GNU archive site." @@ -159,9 +253,39 @@ WARNING: \`$1' is missing on your system. You should only need it if fi ;; + help2man) + if test -z "$run" && ($1 --version) > /dev/null 2>&1; then + # We have it, but it failed. + exit 1 + fi + + echo 1>&2 "\ +WARNING: \`$1' is $msg. You should only need it if + you modified a dependency of a manual page. You may need the + \`Help2man' package in order for those modifications to take + effect. You can get \`Help2man' from any GNU archive site." + + file=`echo "$*" | sed -n 's/.*-o \([^ ]*\).*/\1/p'` + if test -z "$file"; then + file=`echo "$*" | sed -n 's/.*--output=\([^ ]*\).*/\1/p'` + fi + if [ -f "$file" ]; then + touch $file + else + test -z "$file" || exec >$file + echo ".ab help2man is required to generate this page" + exit 1 + fi + ;; + makeinfo) + if test -z "$run" && (makeinfo --version) > /dev/null 2>&1; then + # We have makeinfo, but it failed. + exit 1 + fi + echo 1>&2 "\ -WARNING: \`$1' is missing on your system. You should only need it if +WARNING: \`$1' is $msg. You should only need it if you modified a \`.texi' or \`.texinfo' file, or any other file indirectly affecting the aspect of the manual. The spurious call might also be the consequence of using a buggy \`make' (AIX, @@ -175,12 +299,51 @@ WARNING: \`$1' is missing on your system. You should only need it if touch $file ;; + tar) + shift + if test -n "$run"; then + echo 1>&2 "ERROR: \`tar' requires --run" + exit 1 + fi + + # We have already tried tar in the generic part. + # Look for gnutar/gtar before invocation to avoid ugly error + # messages. + if (gnutar --version > /dev/null 2>&1); then + gnutar "$@" && exit 0 + fi + if (gtar --version > /dev/null 2>&1); then + gtar "$@" && exit 0 + fi + firstarg="$1" + if shift; then + case "$firstarg" in + *o*) + firstarg=`echo "$firstarg" | sed s/o//` + tar "$firstarg" "$@" && exit 0 + ;; + esac + case "$firstarg" in + *h*) + firstarg=`echo "$firstarg" | sed s/h//` + tar "$firstarg" "$@" && exit 0 + ;; + esac + fi + + echo 1>&2 "\ +WARNING: I can't seem to be able to run \`tar' with the given arguments. + You may want to install GNU tar or Free paxutils, or check the + command line arguments." + exit 1 + ;; + *) echo 1>&2 "\ -WARNING: \`$1' is needed, and you do not seem to have it handy on your - system. You might have modified some files without having the +WARNING: \`$1' is needed, and is $msg. + You might have modified some files without having the proper tools for further handling them. Check the \`README' file, - it often tells you about the needed prerequirements for installing + it often tells you about the needed prerequisites for installing this package. You may also peek at any GNU archive site, in case some other package would contain this missing \`$1' program." exit 1 @@ -188,3 +351,10 @@ WARNING: \`$1' is needed, and you do not seem to have it handy on your esac exit 0 + +# Local variables: +# eval: (add-hook 'write-file-hooks 'time-stamp) +# time-stamp-start: "scriptversion=" +# time-stamp-format: "%:y-%02m-%02d.%02H" +# time-stamp-end: "$" +# End: